Epson SureColor SC-P700 / SC-P703 / SC-P704 / SC-P706 / SC-P708 / SC-PX1V / SC-P900 / SC-P903 / SC-P904 / SC-P906 / SC-P908 Waste Ink Tank Chip Resetter

Chip Resetter for Epson C12C935711 Maintenance Tank

£49.95

How to use the resetter: The pins on the resetter should make good contact the terminals on the chip of the tank, be sure to press against the pins firmly. When the chip makes proper contact with the pins on the resetter, the LED light in the resetter will light up (starts out RED, and after 2-3 seconds will blink and then turn GREEN). GREEN means a successful reset. If the LED stays red, it means that the chip on the cartridge may not be resettable. Once the tank has been reset, the waste ink that it has collected has to be removed before installing it back into the printer.

This can be done in a number of ways. One is to dispose of the pad and refill the box with new absorbent material, e.g. nappies or incontinence pad can be cut to size and packed in.

PLEASE NOTE it may be necessary to rotate two tanks. Having a spare ready to go is a good plan anyway.

PLEASE NOTE The body colour may vary. The images are just examples of the types of bodies used to fit the electronics inside.