Epson T35 Resetter for WorkForce Pro WF-4720DWF / WF-4725DWF / WF-4730DTWF / WF-4730DWF / WF-4740DTWF / WF-4740DWF

Chip Resetter for Epson T35 Padlock Ink Cartridges

How to use the resetter: The pins on the resetter should make good contact the terminals on the chip of the tank, be sure to press against the pins firmly. Once connected the LED light in the resetter will light up (starts out RED, and after 2-3 seconds will blink and then turn GREEN). GREEN means a successful reset. If the LED stays red, it means that the chip on the cartridge has not reset. If you allow the cartridge to go low and indicate "X" it won't reset.

PLEASE NOTE The body colour may vary. The images are just examples of the types of bodies used to fit the electronics inside.
This Resetter is also compatible with a number of other Epson cartridges e.g. T603, T405, T502, T37 (378), T34, T202

Epson Original make cartridges contain less ink than our compatibles. For an XL Black - 41.2mL - The XL Colours contain 20.3mL Cols.
If you have Standard Yield cartridges it is 16.1mL in the Black - and only 9.1mL in each of the Colour cartridges.